📅 --/--/----
USD USD: TRY
EUR EUR: TRY
GBP GBP: TRY

D1031Q SIL 2 Switch Proximity Detector Repeater Transistor

Ürün Özellikleri

  • 🔹 SIL2 / SC3 Uyumlu
  • 🔹 Zone 0 (Zone 20), Division 1 Giriş – Zone 2, Division 2 Kurulum
  • 🔹 Yüksek Yoğunluklu: Ünite Başına 4 Kanal
  • 🔹 NO/NC Kontak veya Yakınlık Dedektörü Girişi
  • 🔹 4 Adet Opto İzoleli Transistör Çıkışı (Gerilimden Bağımsız)
  • 🔹 Tek Kanal Versiyonunda Arıza Tespiti için SPDT Röle Çıkışı
  • 🔹 Çift Kanal Versiyonunda Transistör Çıkışı ile Arıza Tespiti
  • 🔹 Üç Port İzolasyonu: Giriş / Çıkış / Besleme
  • 🔹 EMC Uyumu: EN61000-6-2, EN61000-6-4, EN1326-1
  • 🔹 DIP Switch ile Sahada Programlanabilir
  • 🔹 Maks. 250 Vrms (Um) İzin Verilen Gerilim
🟢 ACTIVE

Description

TypeDescription
Supply Voltage12-24 Vdc nom (10 to 30 Vdc) reverse polarity protected, ripple within voltage limits ≤ 5 Vpp
Supply Current Consumption50 mA with input closed and transistors energized.
Supply Power Dissipation1.2 W with 24 V supply voltage, input closed and transistors energized.
Supply Max. power consumptionat 30 V supply voltage, short circuit input and transistors energized, 1.4 W
Input TypeON ≥ 2.1 mA, OFF ≤ 1.2 mA, switch current ≈ 1.65 mA ± 0.2 mA hysteresis.
Input Fault current levelsopen fault ≤ 0.2 mA, short fault ≥ 6.8 mA (when enabled both faults de-energize channel transistor with quad channel unit D1031Q or actuate fault transistor with dual channel unit D1031D).
Input Input equivalent source8 V 1 KΩ typical (8 V no load, 8 mA short circuit).
Output Typevoltage free SPST optocoupled open-collector transistor
Output Open-collector rating100 mA at 35 V (≤ 2.0 V voltage drop).
Output Leakage current≤ 50 µA at 35 V
Output Response time500 µs
Output Frequency response1 KHz maximum
Isolation Test VoltageI.S. In/Out 1.5 KV; I.S. In/Supply 1.5 KV; Out/Supply 500 V; Out 1-3/Out 2-4 500 V.
Environmental conditions Operatingtemperature limits -20 to + 60 °C, relative humidity max 90 % non condensing, up to 35 °C.
Environmental conditions Storagetemperature limits -45 to + 80 °C.
Safety description Safety parametersUo/Voc = 10.7 V, Io/Isc = 15 mA, Po/Po = 39 mW at terminals 13-14, 15-16. Um = 250 Vrms, -20 °C ≤ Ta ≤ 60 °C.
Mounting TypeEN/IEC60715 TH 35 DIN-Rail.
Mounting Weightabout 130 g D1031Q, 120 g D1031D.
Mounting Connectionby polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm2.
Mounting LocationSafe Area/Non Hazardous Locations or Zone 2, Group IIC T4, Class I, Division 2, Groups A, B, C, D Temperature Code T4 and Class I, Zone 2, Group IIC, IIB, IIA T4 installation.
Mounting Protection classIP 20
Mounting DimensionsWidth 22.5 mm, Depth 99 mm, Height 114.5 mm.

Additional information

GMI-Applications

Digital Input

SIL Seviyesi

SIL 2