Dimensions
D5015SK SIL2 Isolator Transmitter Power Supply
Key Features
- 🔹 SIL 2 / SC 3 Certified
- 🔹 Input From Zone 0 / Division 1
- 🔹 Installation In Zone 2 / Division 2
- 🔹 4-20 mA Active-Passive Input, Source-Sink Output
- 🔹 HART® Compatible
- 🔹 Input And Output Short Circuit Proof
- 🔹 High Accuracy
- 🔹 Three-Port Isolation: Input / Output / Supply
Connections
Description
| Type | Description |
|---|---|
| Supply Voltage | 24 Vdc nom (18 to 30 Vdc), reverse polarity protected |
| Current Consumption | 40 mA @ 24 Vdc with 20 mA out, typical. |
| Power Dissipation | 1.0 W @ 24 Vdc with 20 mA out, typical. |
| Input Type | 4 to 20 mA (2 wires Tx current limited ≈ 25 mA), reading range 0 to 24 mA. |
| Transmitter Line Voltage | 16.5 V minimum @ 20 mA. |
| Output Type | 4 to 20 mA, on max. 600 Ω load in source mode; V min. 2 V @ 0 Ω load V max. 30 V in sink mode (max. load resistance 600 Ω), current limited @ ≈ 25 mA. |
| Response Time | 5 ms. |
| Performance (Ref. Conditions) | 24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature. |
| Calibration Accuracy | ≤ ± 20 μA. |
| Linearity Accuracy | ≤ ± 10 μA. |
| Temperature Influence | ≤ ± 2 μA/°C. |
| Isolation Test Voltage | I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/I.S. In 500 V; Out/Supply 500 V; Out/Out 500 V. |
| Operating Temperature | temperature limits –40 to +70 °C. |
| Storage Temperature | temperature limits –45 to +80 °C. |
| Safety Description | Associated apparatus and non-sparking electrical equipment. |
| Safety Parameters | Uo = 26.8 V, Io = 92 mA, Po = 614 mW at terminals 7-8. Uo = 1.1 V, Io = 56 mA, Po = 16 mW at terminals 8-11. Ui = 30 V, Ii = 128 mA, Ci = 0 nF, Li = 0 nH at terminals 8-11. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C. |
| Mounting Type | DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board. |
| Weight | about 130 g. |
| Connection | by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG). |
| Dimensions | Width 12.5 mm, Depth 123 mm, Height 120 mm. |
Additional information
| SIL Seviyesi | SIL 2 |
|---|---|
| GMI-Applications | Analog Input |
| GMI-Input-Range | 4-20 mA |
| Max Load Voltage | 24 Vdc |
| GMI-Status | Active |
| GMI-Series | D5000 |
| GMI-Temperature | -40…+70 °C |
Certifications
| Type | Description | Area | Number | Issued by | Issue Date |
|---|---|---|---|---|---|
| ATEX | DEKRA ATEX D5015 Series English Certificate ( EN ) | Europe | BVS 20 ATEX E 023 X | DEKRA | 2020-03-30 |
| EMC | D5000/D6000 EAC EMC Declaration of Conformity ( RU ) | Eurasian Community | ЕАЭС N RU Д-IT.PA08.B.82326/24 | CONTROL | 2024-09-26 |
| Ex | D5000 CCC certificate for China ( EN ) | China | 2020322316000978 | NEPSI | 2024-03-22 |
| Ex | EAC Ex Certificate for D5000 Series (2nd half) ( RU ) | Eurasian Community | ЕАЭС RU С-IT.AA87.В.00765/21 | CCVE | 2021-07-29 |
| Ex | UL-cUL D5015 Divisions and Zones ( EN ) | North America | 20190924-E222308 | UL | 2019-09-24 |
| FSM | TUV IT 22 SIL 0093 Functional Safety Certificate ( EN ) | International | TUV IT 22 SIL 0093 | TUV_SUD | 2022-07-25 |
| IECEx | DEKRA IECEx D5015 Series Certificate ( EN ) | International | IECEx BVS 20.0016X | DEKRA | 2020-04-07 |
| Maritime | KR Maritime Certificate D5000 Series ( EN ) | International | MIL20769-EL002 | KR | 2024-06-26 |
| Maritime | DNV Maritime Certificate TAA00001U0 for D5000 series for website ( EN ) | International | TAA00001U0 | DNV-GL | 2024-04-02 |
| Metrological | Metrological Certificate Belarus for D5000/D6000 Series ( BE ) | Belarus | 15507 | ROSSTANDART | 2022-08-30 |
| Metrological | Metrological Certificate Kazakhstan for D5000/D6000 series ( KK ) | Kazakhstan | 1152 | KMC | 2021-08-05 |
| Metrological | Metrological Certificate Russia for D5000/D6000 series ( RU ) | Russia | OC.C.32.004.A n. 77881 | ROSSTANDART | 2020-07-28 |
| SIL | TUV C-IS-272994-01 SIL Certificate Summary ( EN ) | International | C-IS-272994-01 | TUV_SUD | 2022-10-14 |
