Dimensions
D5016SS SIL3 2-Wire Active HART TX Current Repeater
Key Features
- 🔹 SIL 3 / SC 3 Certified
- 🔹 Input From Zone 0 / Division 1
- 🔹 Installation In Zone 2 / Division 2
- 🔹 2 Fully Independent Channels
- 🔹 4-20 mA Source-Sink Output
- 🔹 HART® Compatible
- 🔹 High Accuracy
- 🔹 Three-Port Isolation: Input / Output / Supply
- 🔹 High Density, Two Channels Per Unit
Connections
Description
| Type | Description |
|---|---|
| Supply Voltage | 24 Vdc nom (18 to 30 Vdc), reverse polarity protected |
| Current Consumption | 33 mA @ 24 Vdc with 20 mA out, typical. |
| Power Dissipation | 0.90 W @ 24 Vdc with 20 mA output on 250 Ω load and 24 Vdc output supply for sink models, typical. |
| Input Type | 4 to 20 mA (separately powered input, voltage drop ≤ 7 V), reading range 0 to 22 mA. |
| HART Impedance | 225 Ω, typical. |
| Output Type | 4 to 20 mA. |
| Sink Out Voltage Range | 2 to 30 V. |
| Load Range | 0 to 500 Ω, with conventional Tx input 250 Ω nom (160 to 500 Ω), with smart Tx input. |
| Current Limitation | 24 mA (up to 450 Ω load) ≤ max current ≤ 26 mA. |
| Response Time | 20 ms (10 to 90 % step change). |
| Performance (Ref. Conditions) | 24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature. |
| Calibration Accuracy | ≤ ± 20 μA. |
| Linearity Accuracy | ≤ ± 20 μA. |
| Temperature Influence | ≤ ± 2 μA/°C. |
| Isolation Test Voltage | I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/I.S. In 500 V; Out/Supply 500 V; Out/Out 500 V. |
| Operating Temperature | temperature limits –40 to +70 °C. |
| Storage Temperature | temperature limits –45 to +80 °C. |
| Safety Description | Associated apparatus and non-sparking electrical equipment. |
| Safety Parameters | Uo = 8.8 V, Io = 0 mA, Po = 0 mW at terminals 7-8, 9-10 Ui = 30 V, Ii = 100 mA, Ci = 1.1 nF, Li = 0 nH at terminals 7-8, 9-10 |
| Mounting Type | DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board. |
| Weight | about 115 g. |
| Connection | by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG). |
| Dimensions | Width 12.5 mm, Depth 123 mm, Height 120 mm. |
Additional information
| GMI-Input-Range | 4-20 mA |
|---|---|
| GMI-Status | Active |
| GMI-Series | D5000 |
| SIL Seviyesi | SIL 3 |
| Max Load Voltage | 24 Vdc |
| GMI-Temperature | -40…+70 °C |
| GMI-Applications | Analog Input |
Certifications
| Type | Description | Area | Number | Issued by | Issue Date |
|---|---|---|---|---|---|
| ATEX | UL ATEX D5016 Series English Certificate ( EN ) | Europe | UL 22 ATEX 2892X | UL | 2022-12-19 |
| Ex | D5000 CCC certificate for China ( EN ) | China | 2020322316000978 | NEPSI | 2024-03-22 |
| Ex | EAC Ex Certificate for D5000 Series ( RU ) | Eurasian Community | ЕАЭС RU С-IT.AA87.В.01310/24 | CCVE | 2024-06-13 |
| Ex | UL-cUL D5016 Divisions and Zones ( EN ) | North America | E222308-20221220 | UL | 2022-12-28 |
| FSM | TUV IT 22 SIL 0093 Functional Safety Certificate ( EN ) | International | TUV IT 22 SIL 0093 | TUV_SUD | 2022-07-25 |
| IECEx | UL IECEx D5016 Series English Certificate ( EN ) | International | IECEx ULD 22.0034X | UL | 2022-12-19 |
| SIL | TUV IT 22 SIL 0001 A SIL Certificate Summary ( EN ) | International | TUV IT A 22 SIL 0001 Rev.2 | TUV_SUD | 2023-06-15 |
