Description
| Parameter | Description |
|---|---|
| Supply Voltage | 24 Vdc nom. (18 to 30 Vdc), reverse polarity protected |
| Current Consumption | 30 mA @ 24 Vdc, typical |
| Power Dissipation | 1.0 W @ 24 Vdc, typical |
| Input Switching Current | ON ≥ 2.1 mA, OFF ≤ 1.2 mA |
| Open Fault | Current ≤ 0.05 mA |
| Short Fault | Resistance ≤ 100 Ω |
| No Fault | Current ≥ 0.35 mA and resistance ≥ 360 Ω |
| Input Equivalent Source | 8 V 1 kΩ typical (8 V no load, 8 mA short) |
| Output Type | Voltage free SPST solid-state relays, with RL and RH-RL resistances ±5% |
| Fault Impedance | > 1 MΩ |
| Max Voltage | 30 Vdc |
| Max Current | 15 mA |
| Response Time | 500 µs |
| Frequency Response | 1 kHz maximum |
| Isolation Test Voltage | I.S. In/Out 1.5 kV; I.S. In/Supply 1.5 kV; I.S. In/I.S In 500 V; Out/Supply 500 V; Out/Out 500 V |
| Operating Temperature | –40 to +70 °C |
| Storage Temperature | –45 to +80 °C |
| Safety Description | Associated apparatus and non-sparking electrical equipment |
| Safety Parameters | Uo = 10.5 V, Io = 22 mA, Po = 56 mW at terminals 7-8, 9-10. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C |
| Mounting Type | DIN-Rail 35 mm, with or without Power Bus or custom Term. Board |
| Weight | about 135 g |
| Connection | Polarized plug-in disconnect screw terminals, up to 2.5 mm² (13 AWG) |
| Dimensions | Width 12.5 mm, Depth 123 mm, Height 120 mm |
