Dimensions
D5212Q SIL2 – 4-Wire Transmitter Power Supply
Key Features
- 🔹 SIL 2 / SC 3 Certified
- 🔹 Input From Zone 0 / Division 1
- 🔹 Installation In Zone 2 / Division 2
- 🔹 0/4-20 mA Active-Passive Input, Source Output
- 🔹 Duplication, Inversion & Scaling Output
- 🔹 Input Operations: Sum, Difference, Max, Min
- 🔹 Input & Output Short Circuit Protection
- 🔹 Out-of-Range Fault Detection
- 🔹 Alarm Output With User-Settable Trip Points
- 🔹 Modbus RTU RS-485 For Monitoring & Configuration
- 🔹 Fully Programmable Operating Parameters
- 🔹 High Accuracy – μP Controlled A/D Converter
- 🔹 Three-Port Isolation: Input / Output / Supply
- 🔹 High Density – Four Channels Per Unit
Connections
Description
| Type | Description |
|---|---|
| Supply Type | 24 Vdc nom (21.5 to 30 Vdc), reverse polarity protected. |
| Current Consumption | 200 mA @ 24 Vdc with 20 mA in/out, typical. |
| Power Dissipation | 2.75 W @ 24 Vdc with 20 mA in/out, typical. |
| Input Type | 0/4 to 20 mA (2 wire Tx current limited ≈ 25 mA) or separately powered inputs (only for channels 1 and 2). |
| Transmitter Line Voltage | 14.5 V typical, 14.0 V minimum, @ 20 mA. |
| Integration Time | 500 ms. |
| Output Type | 0/4 to 20 mA, on max. 300 Ω load source mode, current limited ≈ 25 mA. |
| Response Time | 100 ms (10 to 90 % step change). |
| Alarm Trip Point Range | Within rated limits of the input sensor. |
| ON-OFF Delay Time | 0 to 1000 s, 100 ms step. |
| Hysteresis | Within rated limits of input sensor. |
| Alarm Output | Voltage free SPST photoMOS: 100 mA, 60 Vdc (≤ 1 V voltage drop). |
| Modbus Interface | Modbus RTU RS-485 up to 57.6 kbps for monitor/configuration/control. |
| Input Performance (Ref. Conditions) | 24 V supply, 250 Ω loads, 23 ± 1 °C ambient temperature. |
| Input Calibration Accuracy | ≤ ± 0.05 % FSR |
| Input Linearity Accuracy | ≤ ± 0.05 % FSR |
| Input Temp. Influence | ≤ ± 0.01% of input FSR for a 1 °C change |
| Analog Output Performance (Ref. Conditions) | 24 V supply, 250 Ω loads, 23 ± 1 °C ambient temperature. |
| Analog Output Calibration Accuracy | ≤ ± 0.05 % FSR |
| Analog Output Linearity Accuracy | ≤ ± 0.05 % FSR |
| Analog Output Temp. Influence | ≤ ± 0.005 % of output FSR for a 1 °C change |
| Isolation Test Voltage | I.S. In/Out 1.5 kV; I.S. In/Supply 1.5 kV; Out/Supply 500 V; I.S. In/Alarm 1.5 kV; Supply/Alarm 500 V; Out/Alarm 500 V. |
| Safety Description | Associated apparatus and non-sparking electrical equipment. |
| Safety Parameters | Uo = 24.1 V, Io = 86 mA, Po = 516 mW at terminals 13-14, 15-16, 17-18, 19-20. Uo = 1.1 V, Io = 56 mA, Po = 16 mW at terminals 21-22, 23-24. Ui = 30 V at terminals 21-22, 23-24. Ii = 128 mA at terminals 21-22, 23-24. Ci = 2.1 nF, Li = 0 nH at terminals 21-22, 23-24. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C. |
| Mounting Type | DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board. |
| Weight | about 120 g. |
| Connection | by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm² (13 AWG). |
| Dimensions | Width 22.5 mm, Depth 123 mm, Height 120 mm. |
Additional information
| GMI-Applications | Analog Input |
|---|---|
| GMI-Status | Active |
| GMI-Series | D5000 |
| SIL Seviyesi | SIL 2 |
| GMI-Input-Range | 4-20 mA |
| Max Load Voltage | 24 Vdc |
| GMI-Temperature | -40…+70 °C |
Certifications
| Type | Description | Area | Number | Issued by | Issue Date |
|---|---|---|---|---|---|
| ATEX | UL ATEX D5212 Series English Certificate ( EN ) | Europe | DEMKO 18 ATEX 2017X | UL | 2021-11-12 |
| EMC | D5000/D6000 EAC EMC Declaration of Conformity ( RU ) | Eurasian Community | ЕАЭС N RU Д-IT.PA08.B.82326/24 | CONTROL | 2024-09-26 |
| Ex | D5000 CCC certificate for China ( EN ) | China | 2020322316000978 | NEPSI | 2024-03-22 |
| Ex | EAC Ex Certificate for D5000 Series ( RU ) | Eurasian Community | ЕАЭС RU С-IT.AA87.В.01310/24 | CCVE | 2024-06-13 |
| Ex | UL-cUL D5212 Divisions and Zones ( EN ) | North America | 20181029-E222308 | UL | 2018-10-29 |
| FSM | TUV IT 22 SIL 0093 Functional Safety Certificate ( EN ) | International | TUV IT 22 SIL 0093 | TUV_SUD | 2022-07-25 |
| IECEx | UL IECEx D5212 Series English Certificate ( EN ) | International | IECEx ULD 18.0013X | UL | 2021-11-12 |
| Maritime | KR Maritime Certificate D5000 Series ( EN ) | International | MIL20769-EL002 | KR | 2024-06-26 |
| Maritime | DNV Maritime Certificate TAA00001U0 for D5000 series for website ( EN ) | International | TAA00001U0 | DNV-GL | 2024-04-02 |
| Metrological | Metrological Certificate Belarus for D5000/D6000 Series ( BE ) | Belarus | 15507 | ROSSTANDART | 2022-08-30 |
| Metrological | Metrological Certificate Kazakhstan for D5000/D6000 series ( KK ) | Kazakhstan | 1152 | KMC | 2021-08-05 |
| Metrological | Metrological Certificate Russia for D5000/D6000 series ( RU ) | Russia | OC.C.32.004.A n. 77881 | ROSSTANDART | 2020-07-28 |
| SIL | TUV C-IS-722160171 SIL Certificate Summary ( EN ) | International | C-IS-722160171 | TUV_SUD | 2022-10-14 |
