D5062S .S. SIL2 Vibration Transducer Interface

Dimensions

Type	Description
Supply Voltage	24 Vdc nom (18 to 30 Vdc), reverse polarity protected
Current Consumption	90 mA @ 24 Vdc with 20 mA transducer consumption and 2 mA output load, typical
Power Dissipation	2.0 W @ 24 Vdc with 20 mA transducer consumption and 2 mA output load, typical
Input Type	0 V to -20 V (10 kΩ impedance at terminals 7-8 or 8-9)
3-Wire Sensor Supply Voltage	> -22 V @ 0 mA, > -17 V @ 15 mA (current limited @ ≈ 23 mA)
2-Wire Sensor Supply Voltage	> -17 V with constant current supply
2-Wire Sensor Supply Current	Selectable @ 4 mA, 6 mA or 10 mA via internal DIP–Switch
Output Type	0 to -20 V on 10 kΩ load, with 10 Ω output resistance
Response Time	≤ 10 µs (10 to 90 % step change)
Frequency Response	DC to 20 kHz within 1 dB max.
Calibration Accuracy	≤ ± 0.1 % FSR
Linearity Accuracy	≤ ± 0.05 % FSR
Temp. Influence	≤ ± 0.005 % on zero/span for 1 °C change
Isolation Test Voltage	I.S. In/Out 1.5 kV; I.S. In/Supply 1.5 kV; Out/Supply 500 V
Operating Temperature	–40 to +70 °C
Storage Temperature	–45 to +80 °C
Safety Description	Associated apparatus and non-sparking electrical equipment
Safety Parameters	Uo = 27 V, Io = 90 mA, Po = 576 mW (term. 7-8-9-10); Ui = 30 V, Ci = 0 nF, Li = 0 nH; Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C
Mounting Type	DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board
Weight	About 125 g
Connection	Polarized plug-in screw terminals for up to 2.5 mm² (13 AWG)
Dimensions	Width 12.5 mm, Depth 123 mm, Height 120 mm

SIL Seviyesi	SIL 2