D5038DA SIL 3 Line-Fault Proximity Repeater

Dimensions

Type	Description
Supply Voltage	24 Vdc nom. (18 to 30 Vdc), reverse polarity protected.
Current Consumption	30 mA @ 24 Vdc, typical.
Power Dissipation	1.0 W @ 24 Vdc, typical.
Input Switching Current Levels	ON ≥ 2.1 mA, OFF ≤ 1.2 mA.
Open Fault	Current ≤ 0.05 mA.
Short Fault	Resistance ≤ 100 Ω.
No Fault	Current ≥ 0.35 mA and resistance ≥ 360 Ω.
Input Equivalent Source	8 V 1 kΩ typical (8 V no load, 8 mA short).
Output Type	Voltage free SPST solid-state relays, with series (RL) and parallel (RH-RL) resistances, ±5% tolerance.
Fault Impedance	> 1 MΩ.
Max Voltage	30 Vdc.
Max Current	15 mA.
Response Time	500 µs.
Frequency Response	1 kHz maximum.
Isolation Test Voltage	I.S. In/Out 1.5 kV; I.S. In/Supply 1.5 kV; I.S. In/I.S In 500 V; Out/Supply 500 V; Out/Out 500 V.
Operating Temperature	Temperature limits –40 to +70 °C.
Storage Temperature	Temperature limits –45 to +80 °C.
Safety Description	Associated apparatus and non-sparking electrical equipment.
Safety Parameters	Uo = 10.5 V, Io = 22 mA, Po = 56 mW at terminals 7-8, 9-10. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C.
Mounting Type	DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board.
Weight	about 135 g.
Connection	By polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions	Width 12.5 mm, Depth 123 mm, Height 120 mm.

SIL Seviyesi	SIL 2