D5037D SIL2 Proximity Transistor Out Repeater

Dimensions

Type	Description
Supply Voltage	24 Vdc nom (18 to 30 Vdc), reverse polarity protected.
Current Consumption	22 mA @ 24 Vdc with short circuit input and transistor closed, typical.
Power Dissipation	0.53 W @ 24 Vdc with short circuit input and transistor closed, typical.
Input Switching Current Levels	ON ≥ 2.1 mA, OFF ≤ 1.2 mA.
Fault Current Levels	open fault ≤ 0.2 mA, short fault ≥ 6.8 mA
Input Equivalent Source	8 V 1 kΩ typical (8 V no load, 8 mA short).
Output Type	Voltage free SPST optocoupled open-collector transistor.
Open-Collector/Drain Rating	100 mA @ 35 Vdc (≤ 1.5 V voltage drop).
Leakage Current	≤ 50 μA @ 35 Vdc.
Response Time	≤ 100 μs.
Frequency Response	5 kHz maximum.
Isolation Test Voltage	I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/I.S In 500 V; Out/Supply 500 V; Out/Out 500 V.
Operating Temperature	temperature limits –40 to +70 °C.
Storage Temperature	temperature limits –45 to +80 °C.
Safety Description	Associated apparatus and non-sparking electrical equipment.
Safety Parameters	Uo = 10.5 V, Io = 22 mA, Po = 56 mW at terminals 7-8, 9-10. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C.
Mounting Type	DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board.
Weight	about 125 g.
Connection	by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions	Width 12.5 mm, Depth 123 mm, Height 120 mm.

SIL Seviyesi	SIL 2