D5034S Line-Fault Transp. Switch Prox Repeater

Dimensions

Type	Description
Supply Voltage	24 Vdc nom (18 to 30 Vdc), reverse polarity protected.
Current Consumption	30 mA @ 24 Vdc with short circuit input, typical.
Power Dissipation	0.72 W @ 24 Vdc with short circuit input, typical.
Input Current Range	≥ 0.1 mA to ≤ 8.0 mA.
Input Equivalent Source	8 V 1 kΩ typical (8 V no load, 8 mA short).
Output Type	0.1 to 8.0 mA in sink mode, V max. 30 V, current limited ≈ 8 mA, repeats input current level.
Response Time	1 ms (0 to 100 % step change).
Performance Reference Conditions	24 V supply, 23 ± 1 °C ambient temperature.
Calibration Accuracy	≤ ± 0.25 % FSR.
Linearity Accuracy	≤ ± 0.25 % FSR.
Temp. Influence	≤ ± 0.03 % FSR on zero/span for a 1 °C change.
Isolation Test Voltage	I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/I.S In 500 V; Out/Supply 500 V; Out/Out 500 V.
Operating Temperature	temperature limits –40 to +70 °C.
Storage Temperature	temperature limits –45 to +80 °C.
Safety Description	Associated apparatus and non-sparking electrical equipment.
Safety Parameters	Uo = 10.5 V, Io = 15 mA, Po = 39 mW at terminals 7-8, 9-10. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C.
Mounting Type	DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board.
Weight	about 140 g.
Connection	by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions	Width 12.5 mm, Depth 123 mm, Height 120 mm.

SIL Seviyesi	SIL 3