Dimensions
D1180D Flammable Liquid Presence Detector
Ürün Özellikleri
- 🔹 Zone 0 (Zone 20) Alanından Giriş
- 🔹 Evrensel AC Besleme Gerilimi: 85-264 Vac Veya 100-350 Vdc
- 🔹 Çift Kanal Yanıcı Sıvı Algılama Dedektörü Arayüz Girişi
- 🔹 NPN / PNP 3 Telli Yakınlık Sensörü Girişi
- 🔹 İki SPDT Röle Çıkış Sinyali
- 🔹 Üç Port İzolasyonu: Giriş / Çıkış / Besleme
- 🔹 EMC Uyumluluğu: EN61000-6-2 · EN61000-6-4
- 🔹 DIP Switch İle Sahada Programlanabilir
- 🔹 Yüksek Yoğunluklu: Ünite Başına İki Kanal
- 🔹 250 Vrms (Um) Maksimum Gerilim (Cihaza Bağlı Enstrümanlar İçin)
🟡 Phase-Out
Yedek Parça Desteği: 01.01.2027’ye Kadar
Yedek Parça Desteği: 01.01.2027’ye Kadar
Connections
Description
| Type | Description |
|---|---|
| Supply Voltage | 115-230 Vac, 50-60 Hz nom (85 to 264 Vac, 48 to 400 Hz) or 100 to 350 Vdc, ripple within voltage limits ≤ 10 Vpp. Limit supply voltage to 250 Vrms for Intrinsic Safety applications. |
| Current Consumption | 30 mA @ 115 Vac, 20 mA @ 230 Vac with short input and relays energized. |
| Max. Power Consumption | 2.2 W at 264 Vac with short input and relays energized. |
| Input Switching Current | DIP switch settable at ≈ 8.0, 11.0, 14.0, 17.0 mA trip point; 13.0 V 150 Ω typical equivalent source (13 V no load, 25 mA short circuit limited). |
| Output | Voltage free SPDT relay contact; AgCdO; 2 A 250 Vac 500 VA / 2 A 250 Vdc 80 W resistive; 30×10⁶ mechanical / 1×10⁵ electrical operations typical. |
| Relay Timings | Operate / release: 7 / 3 ms typical; Bounce time NO / NC: 3 / 5 ms; Response time: 20 ms; Frequency: max 10 Hz. |
| Isolation Test Voltage | I.S. In/Out 2.5 KV; I.S. In/Supply 2.5 KV; I.S. In/I.S. In 500 V; Out/Supply 2.5 KV; Out/Out 2.5 KV. |
| Environmental Conditions | Operating temp. -20 to +60 °C, max 90% RH non-condensing up to 35 °C. Storage: -45 to +80 °C. |
| Safety Parameters | Uo/Voc = 15.8 V, Io/Isc = 109 mA, Po/Po = 428 mW at terminals 13-16, 9-12. Uo/Voc = 15.8 V, Io/Isc = 13 mA, Po/Po = 51 mW at terminals 14-16, 13-15, 10-12, 9-11. Um = 250 Vrms, -20 °C ≤ Ta ≤ 60 °C. |
| Mounting Type | EN/IEC60715 TH 35 DIN-Rail. |
| Weight | About 160 g. |
| Connection | By polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm². |
| Location | Safe Area installation. |
| Protection Class | IP 20. |
| Dimensions | Width 22.5 mm, Depth 99 mm, Height 114.5 mm. |
Additional information
| GMI-Applications | Load Cell Input |
|---|
