Relay Voltage (Low Power) |
24 Vdc nom (20 to 30 Vdc) reverse polarity protected, ripple within voltage limits ≤ 5 Vpp. |
Relay Current Consumption (Low Power) |
35 mA with relays energized. |
Relay Power Dissipation (Low Power) |
0.85 W with 24 V supply voltage and relays energized. |
Relay Max. Power Consumption (Low Power) |
at 30 V supply voltage and relays energized, 0.9 W |
Relay Input Type (Low Power) |
switch contact, logic level. |
Relay Trip Voltage Levels (Low Power) |
OFF status ≤ 1.0 V, ON status ≥ 6.0 V (maximum 30 V). |
Relay Input Current Consumption (Low Power) |
3 mA @ 24 V(≈ 10 KΩ input impedance). |
Relay Output Type (Low Power) |
voltage free SPDT relay contact. |
Relay Contact Material (Low Power) |
AgNi90/10. |
Relay Contact Rating (Low Power) |
60 Vdc, 2 A for Intrinsic Safety applications, 2 A 250 Vac 500 VA, 2 A 250 Vdc 80 W for non-Intrinsic Safety. |
Relay Load Breaking Capacity (Low Power) |
15 * 10^6 / 1 * 10^5 operation, typical. |
Relay Operate / Release Time (Low Power) |
5 / 2 ms typical. |
Relay Bounce Time NO / NC (Low Power) |
1 / 5 ms. |
Relay Response Time (Low Power) |
20 ms. |
Relay Frequency Response (Low Power) |
10 Hz maximum. |
Relay Safety Parameters (Low Power) |
Uo/Voc = 0 V, Io/Isc = 0 mA, Po/Po = 0 mW. Ui/Vmax = 60 V, Ii/Imax = 2 A, Ci = 0 nF, Li = 0 nH. Um = 250 Vrms, -20 °C ≤ Ta ≤ 60 °C. |
Relay Mounting |
EN/IEC60715 TH 35 DIN-Rail. |
Relay Weight |
about 120 g |
Relay Connection |
by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm2. |
Relay Location |
Safe Area/Non Hazardous Locations or Zone 2, Group IIC T4, Class I, Division 2, Groups A, B, C, D Temperature Code T4 and Class I, Zone 2, Group IIC, IIB, IIA T4 installation. |
Relay Protection Class |
IP 20. |
Relay Dimensions |
Width 22.5 mm, Depth 99 mm, Height 114.5 mm. |