Supply Voltage |
12–24 Vdc nom (10 to 30 Vdc), reverse polarity protected, ripple ≤ 5 Vpp. |
Current Consumption |
40 mA @ 24 V with output transistor energized. |
Power Dissipation |
1.0 W with 24 V supply voltage and output transistor energized. |
Max. Power Consumption |
1.2 W @ 30 V with output transistor energized. |
Input Type |
magnetic pick-up, contact, EN60947-5-6 proximity, open-collector transistor, TTL, CMOS (up to 50 KHz). |
Input Range |
0 to 50 KHz. |
Magnetic Pick-up Sensitivity |
≥ 20 mVpp (≤ 100 Hz), ≥ 50 mVpp (≤ 1 KHz), ≥ 100 mVpp (≤ 5 KHz), ≥ 500 mVpp (≤ 20 KHz), ≥ 1 Vpp (≤ 50 KHz). |
Switching Current Levels |
ON ≥ 2.1 mA, OFF ≤ 1.2 mA, ≈ 1.65 mA ± 0.2 mA hysteresis. |
Input Equivalent Source |
8 V 1 KΩ typical (8 V no load, 8 mA short circuit). |
Output Type |
voltage free SPST optocoupled open-collector transistor. |
Open-Collector Rating |
100 mA at 35 V (≤ 1.5 V drop). |
Leakage Current |
≤ 50 µA at 35 V. |
Frequency Response |
50 KHz maximum. |
Isolation Test Voltage |
I.S. In/Out 1.5 KV; I.S. In/Supply 1.5 KV; Out/Supply 500 V. |
Operating Conditions |
-20 to +60 °C, RH max 90 %, non condensing (≤ 35 °C). |
Storage Conditions |
-45 to +80 °C. |
Safety Parameters |
Uo/Voc = 10.9/15.5/10.9 V, Io/Isc = 1.1/13/23 mA, Po/Po = 3/48/60 mW (terms: 13-16, 14-15, 15-16). Ui/Vmax = 30 V, Ci = 0 nF, Li = 0 nH. Um = 250 Vrms, -20 °C ≤ Ta ≤ 60 °C. |
Mounting |
EN/IEC60715 TH 35 DIN-Rail. |
Weight |
about 145 g. |
Connection |
by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm². |
Location |
Safe Area/Zone 2, Group IIC T4, Class I Division 2, Groups A, B, C, D Temperature Code T4. |
Protection Class |
IP 20. |
Dimensions |
Width 22.5 mm, Depth 99 mm, Height 114.5 mm. |