Supply Voltage |
24 Vdc nom (20 to 30 Vdc) reverse polarity protected, ripple within voltage limits ≤ 5 Vpp. |
Supply Current Consumption |
50 mA with 20 mA output typical |
Supply Power Dissipation |
1.0 W with 24 V supply voltage and 20 mA output typical |
Supply Max. power consumption |
at 30 V supply voltage and overload condition, 1.4 W |
Input Type |
0/4 to 20 mA with ≤ 2.0 V voltage drop, reverse polarity protected. |
Output Type |
0/4 to 20 mA, on max. 750 Ω load, current limited at ≈ 23 mA. |
Output Response time |
50 ms (10 to 90 % step change). |
Output Output ripple |
≤ 20 mVrms on 250 Ω communication load on 0.5 to 40 KHz band |
Output Frequency response |
0.5 to 40 KHz bidirectional within 3 dB (HART® and higher frequency protocols). |
Performance Type |
Ref. Conditions 24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature. |
Performance Calibration accuracy |
≤ ± 0.1 % of full scale. |
Performance Linearity error |
≤ ± 0.05 % of full scale. |
Performance Supply voltage influence |
≤ ± 0.05 % of full scale for a min to max supply change. |
Performance Load influence |
≤ ± 0.05 % of full scale for a 0 to 100 % load resistance change. |
Performance Temperature influence |
≤ ± 0.01 % on zero and span for a 1 °C change. |
Isolation Test Voltage |
I.S. Out/In 1.5 KV; I.S. Out/Supply 1.5 KV; I.S. Out/I.S. Out 500 V; In/Supply 500 V; In/In 500 V. |
Environmental conditions Operating |
temperature limits -20 to + 60 °C, relative humidity max 95 %. |
Environmental conditions Storage |
temperature limits – 45 to + 80 °C. |
Safety description Safety parameters |
Uo/Voc = 25.2 V, Io/Isc = 87 mA, Po/Po = 548 mW at terminals 14-15, 10-11. Um = 250 Vrms, -20 °C ≤ Ta ≤ 60 °C. |
Mounting Type |
EN/IEC60715 TH 35 DIN-Rail. |
Mounting Weight |
about 120 g |
Mounting Connection |
by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm2. |
Mounting Location |
Safe Area/Non Hazardous Locations or Zone 2, Group IIC T4, Class I, Division 2, Groups A, B, C, D Temperature Code T4 and Class I, Zone 2, Group IIC, IIB, IIA T4 installation. |
Mounting Protection class |
IP 20. |
Mounting Dimensions |
Width 22.5 mm, Depth 99 mm, Height 114.5 mm. |