D6016DK SIL3 2-Wire Active HART Isolator

Dökümanlar

Type	Description
Data Sheet	Datasheet of D6030 ( EN \| FR \| RU \| DE \| ES \| IT \| CN \| JA \| PT )
Instruction Manual	Instruction Manual D6030 ( EN )
Safety Manual	Safety Manual D6030 ( EN )

Type	Description	Area	Number	Issued by	Issue Date
FSM	TUV IT 22 SIL 0093 Functional Safety Certificate ( EN )	International	TUV IT 22 SIL 0093	TUV_SUD	2022-07-25
SIL	TUV IT 22 SIL 0001 A SIL Certificate Summary ( EN )	International	TUV IT A 22 SIL 0001 Rev.2	TUV_SUD	2023-06-15

Image of D6016_size

Type	Description
Supply
Voltage	24 Vdc nom (18 to 30 Vdc), reverse polarity protected
Current Consumption	45 mA @ 24 Vdc with 20 mA out, typical.
Power Dissipation	0.68 W @ 24 Vdc with 20 mA out, typical.
Input
Type	4 to 20 mA (separately powered input, voltage drop ≤ 0.5 V) or 4 to 20 mA (2 wires Tx current limited ≈ 25 mA), reading range 0 to 24 mA.
Transmitter Line Voltage	15.0 V typical, 14.5 V minimum, @ 20 mA.
Output
Type	4 to 20 mA, on max. 550 Ω load in source mode (typical 12 V compliance); V min. 8 V @ 0 Ω load, V max. 30 V in sink mode, current limited ≈ 25 mA or 1 to 5 V on internal 250 Ω shunt (or 2 to 10 V on internal 500 Ω shunt on request). Output current duplication available (D6014D).
Response Time	5 ms (0 to 100 % step change).
Performance
Ref. Conditions	24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature.
Calibration Accuracy	≤ ± 0.1 % FSR.
Linearity Accuracy	≤ ± 0.05 % FSR.
Temp. Influence	≤ ± 0.01 % FSR on zero/span for a 1 °C change.
Isolation
Test Voltage	In/Out 2.5 kV; In/Supply 2.5 kV; In/In 500 V; Out/Supply 500 V; Out/Out 500 V.
Environmental Conditions
Operating Temperature	Temperature limits –40 to +70 °C.
Storage Temperature	Temperature limits –45 to +80 °C.
Mounting
Type	DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board.
Weight	About 130 g.
Connection	By polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions	Width 12.5 mm, Depth 123 mm, Height 120 mm.