| Loop Input Type | loop powered control signal. |
| Loop Input Supply | 24 Vdc nom (20 to 30 Vdc) reverse polarity protected, 2 A time lag fuse internally protected. |
| Loop Input Current Consumption | 65 mA @ 24 V with 45 mA output typical, ≤ 10 mA when fault detected. |
| Loop Input Power Dissipation | 1.1 W @ 24 V supply and 45 mA nominal load. |
| Loop Input Max. Power Consumption | at 30 V supply, 1.8 W. |
| Override Input Type | override control signal de-energizes output when enabled by dip-switch. |
| Override Input Range | 24 Vdc nom (20 to 30 Vdc) to disable; 0 to 5 Vdc to de-energize, reverse polarity protected. |
| Override Input Current | 5 mA @ 24 V. |
| Loop Output Type | 45 mA at 13.0 V (Out A), 10.2 V (Out B), 8.5 V (Out C). |
| Loop Output Short Circuit Current | ≥ 50 mA (55 mA typical). |
| Loop Output Response Time | 75 ms. |
| Fault Detection Type | open/short circuit detection with dip-switch; output de-energized until fault is cleared. |
| Short Output Detection | load ≤ 50 Ω (≈ 2 mA forcing). |
| Open Output Detection | load > 10 KΩ. |
| Fault Signalling Type | NE SPST optocoupled open-collector transistor. |
| Fault Output Rating | 100 mA at 35 Vdc (≤ 1.5 V drop), ≤ 50 µA leakage. |
| Fault Response Time | ≤ 5 ms. |
| Loop Isolation Test Voltage | I.S. Out/In/Override/Fault 1.5 KV; In/Fault/Override 500 V. |
| Loop Environmental Conditions | Operating: -20 to + 60 °C, max 95 % RH non condensing. |
| Loop Storage Conditions | -45 to + 80 °C. |
| Loop Safety Parameters | Uo/Voc = 24.8 V, Io/Isc = 147 mA (Out A), 108 mA (Out B), 93 mA (Out C). Po/Po = 907/667/571 mW. Um = 250 Vrms, -20 °C ≤ Ta ≤ 60 °C. |
| Loop Mounting | EN/IEC60715 TH 35 DIN-Rail. |
| Loop Weight | about 135 g. |
| Loop Connection | by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm2. |
| Loop Location | Safe Area/Non Hazardous Locations or Zone 2, Group IIC T4, Class I, Division 2, Groups A-D, Class I, Zone 2, Group IIC, IIB, IIA T4 installation. |
| Loop Protection Class | IP 20. |
| Loop Dimensions | Width 22.5 mm, Depth 99 mm, Height 114.5 mm. |
