📅 --/--/----
USD USD: ⏳ TRY
EUR EUR: ⏳ TRY
GBP GBP: ⏳ TRY

D1012Q Quadruple Repeater Power Supply DIN-Rail

Ürün Özellikleri

  • 🔹 Zone 0 (Zone 20), Division 1 Giriş — Zone 2, Division 2 Kurulum
  • 🔹 Dört Kanallı: 2 Telli Transmitterlar İçin
  • 🔹 Yüksek Yoğunluk: Her Ünitede İki Kanal
  • 🔹 4–20 mA Giriş / Çıkış Sinyali
  • 🔹 Giriş ve Çıkışlarda Kısa Devre Koruması
  • 🔹 Yüksek Doğruluk
  • 🔹 EMC Uyumluluğu: EN61000-6-2, EN61000-6-4
  • 🔹 250 Vrms Maksimum Gerilim Toleransı
🟡 PHASE-OUT
Yedek Parça Desteği: 01.01.2027’ye Kadar

Description

TypeDescription
Supply Voltage24 Vdc nom (20 to 30 Vdc) reverse polarity protected, ripple within voltage limits ≤ 5 Vpp.
Supply Current Consumption160 mA with 20 mA output typical.
Supply Power Dissipation2.3 W for 4 channels with 24 V supply voltage and 20 mA output typical.
Supply Max. power consumptionat 30 V supply voltage, 4.0 W for 4 channels
Input Type4 to 20 mA (2 wire Tx current limited at ≈ 22 mA).
Output Type14.0 V typical at 20 mA with max. 30 mVrms ripple.
Output Response time4 to 20 mA, on max. 300 Ω load source mode, current limited at 20.6 mA.
Output Output ripple≤ 30 mVrms.
Performance TypeRef. Conditions 24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature
Performance Calibration accuracy≤ ± 0.1 % of full scale.
Performance Linearity error≤ ± 0.05 % of full scale.
Performance Supply voltage influence≤ ± 0.05 % of full scale for a min to max supply change.
Performance Load influence≤ ± 0.05 % of full scale for a 0 to 100 % load resistance change.
Performance Temperature influence≤ ± 0.01 % on zero and span for a 1 °C change.
Isolation Test VoltageI.S. In/Out 1.5 KV; I.S. In/Supply 1.5 KV.
Environmental conditions Operatingtemperature limits -20 to + 60 °C, relative humidity max 95 %.
Environmental conditions Storagetemperature limits – 45 to + 80 °C.
Safety description Safety parametersUo/Voc = 21.5 V, Io/Isc = 93 mA, Po/Po = 496 mW at terminals 13-14, 15-16, 9-10, 11-12. Um = 250 Vrms, -20 °C ≤ Ta ≤ 60 °C.
Mounting TypeEN/IEC60715 TH 35 DIN-Rail.
Mounting Weightabout 140 g.
Mounting Connectionby polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm2.
Mounting LocationSafe Area/Non Hazardous Locations or Zone 2, Group IIC T4, Class I, Division 2, Groups A, B, C, D Temperature Code T4 and Class I, Zone 2, Group IIC, IIB, IIA T4 installation.
Mounting Protection classIP 20.
Mounting DimensionsWidth 22.5 mm, Depth 99 mm, Height 114.5 mm.

Additional information

GMI-Applications

Analog Input