📅 --/--/----
USD USD: TRY
EUR EUR: TRY
GBP GBP: TRY

D1010S-056 mV to mA Converter DIN-Rail Models

Ürün Özellikleri

  • 🔹 Zone 0 (Zone 20) Girişi, Zone 2 Kurulumu
  • 🔹 -5 ila +55 mV Giriş / 4–20 mA Çıkış
  • 🔹 Giriş ve Çıkış Kısa Devre Korumalı
  • 🔹 Yüksek Doğruluk
  • 🔹 3 Port İzolasyon: Giriş / Çıkış / Besleme
  • 🔹 EMC Uyumu: EN61000-6-2, EN61000-6-4
  • 🔹 Maks. 250 Vrms (Um) İzin Verilen Gerilim

Description

TypeDescription
Supply Type24 Vdc nom (20 to 30 Vdc) reverse polarity protected, ripple within voltage limits ≤ 5 Vpp.
Supply Current Consumption40 mA with 20 mA output typical.
Supply Power Dissipation0.9 W with 24 V supply voltage and 20 mA output typical
Supply Max. power consumptionat 30 V supply voltage and overload condition 1.2 W.
Input Type-5 to +35 mV
Output Type4 to 20 mA, on 250 Ω load in source mode.
Output Response time25 ms (10 to 90 % step change) with 8.6 dB of NMRR.
Output Common mode rejectionbetter than 80 dB.
Output Output ripple≤ 20 mVrms on 250 Ω load.
Output BurnoutUpscale in 25 ms.
Performance TypeRef. Conditions 24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature
Performance Calibration accuracy≤ ± 0.1 % of full scale
Performance Linearity error≤ ± 0.1 % of full scale
Performance Supply voltage influence≤ ± 0.02 % of full scale for a min to max supply change.
Performance Load influence≤ ± 0.02 % of full scale for a 0 to 100 % load resistance change.
Performance Stabilityestimated degradation in 3 years ≤ ± 0.47 % least sensitive range.
Isolation Test VoltageI.S. In/Out 1.5 KV; I.S. In/Supply 1.5 KV; Out/Supply 500 V
Environmental conditions Operatingtemperature limits -20 to + 60 °C, relative humidity max 95 %.
Environmental conditions Storagetemperature limits -45 to + 80 °C.
Safety description Safety parametersUo/Voc = 1.1 V, Io/Isc = 38 mA, Po/Po = 11 mW at terminals 15-16. Ui/Vmax = 30 V, Ii/Imax = 104 mA, Ci = 1.05 nF, Li = 0 nH at terminals 15-16. Um = 250 Vrms, -20 °C ≤ Ta ≤ 60 °C.
Mounting TypeEN/IEC60715 TH 35 DIN-Rail.
Mounting Weightabout 110 g.
Mounting Connectionby polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm2.
Mounting LocationSafe Area or Zone 2, Group IIC T4 installation.
Mounting Protection classIP 20.
Mounting DimensionsWidth 22.5 mm, Depth 99 mm, Height 114.5 mm.

Additional information

GMI-Applications

Analog Input