The HART® Termination Board model TB-D5001-HRT-005 allows the remote monitoring of any HART®-compatible 4/20 mA field loop, while converting the input current into a 1- 5 V signals. This is obtained by one locally mounted HART® Multiplexer Modem 5700 and by terminal block interface connectors to access the relevant loops. The board is installed in series to the loops. The single TB-D5001-HRT-005 Termination Board supports 32 channels. Yet, it can be extended with additional TB-D5001-HRT-005 units (up to 8) to manage all 256 channels available on the HART® Multiplexer Modem 5700. The Mux unit connects, via the RS-485 interface, to an external PC running an FDT based software package (PACTware™, etc…) through a dedicated Device Type Manager (DTM). The PC can communicate with multiple Mux units, located on different boards, in a multi-drop RS-485 mode. The HART® Termination Board TB-D5001-HRT-005 is SIL 3 certified as non-interfering with the signal loops.


• SIL 3 according to IEC 61508:2010 Ed. 2
• Systematic capability SIL 3
• Transparent Board for HART® Multiplexing of up to 32 analog signals (extendable to 256 channels with 7 additional TB-D5001-HRT-005 units)
• On board 4/20 mA current to 1/5 V voltage signal convertion resistances
• Redundant Power Supply connection by screw terminals
• Supply is fuse protected and with LED indication
• RS-485 interface terminals to communicate with the HART® Mux unit
• HART® loop interface terminal block connectors
• HART® channels isolated with dual capacitors (short circuit proof)
• Spare fuse provided
• Includes hardware for Easy installation in three modes:
– Wall mounting, M4 Threads
– Wall mounting, Self-Threading
– Din Rail mounting


Ek bilgi


HART® compatible


Henüz değerlendirme yapılmadı.

“TB-D5001-HRT-005” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

This field is required.