The D5096S is a relay module suitable for the switching of safety related circuits, up to SIL 3 level according to IEC 61508:2010 Ed. 2 for high risk industries.
It provides isolation between input and output contacts.
A wide compatibility towards different DCS/PLC is guaranteed: driving line pulse testing, executed by DCS/PLC, is permitted by a dedicated internal circuit, to prevent relay and LED flickering.
D5096S has 2+2 SPST relay contacts connected in parallel and then in series to avoid spurious trip and to increase availability (see function diagram).
High availability SIL 3 Safety Function for NE load or F&G / ND load is available.
Load is isolated from supply on both polarities: +/AC, -/AC.
Mounting on standard DIN-Rail, with or without Power Bus, or on customized Termination Boards, in Safe Area or in Zone 2.


• Systematic capability SIL 3.
• Installation in Zone 2.
• Compatible with DCS/PLC pulse testing.
• Line and Load short/open circuit detection.
• Presence of load voltage monitoring.
• The fault in the field is directly mirrored to the PLC DO.
• 5 A high availability to avoid spurious trip SIL 3 contacts for NE or F&G/ND load.
• 6 A inrush current at 24 Vdc / 250 Vac.
• Input/Output/Supply isolation.
• EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
• Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus, or customized Termination Boards.


Ek bilgi


Safety Relay



Coil Voltage

24 VDC

Contact Material

Gold Plated Ag Alloy


Bipolar Load Interruption, Emerson DeltaV™ alliance, Fault Mirroring, Line/Load Fault Detection

Load Status / Safety Function

ND / Energize To Trip

Max Contact Rating


Max Load Voltage

250 VAC, 250 VDC

Operating Temperature

-40 / +70 °C

Safety Integrity Level



Henüz değerlendirme yapılmadı.

“D5096S” için yorum yapan ilk kişi siz olun

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir