| Relay Voltage (Low Power) | 24 Vdc nom (20 to 30 Vdc) reverse polarity protected, ripple within voltage limits ≤ 5 Vpp. |
| Relay Current Consumption (Low Power) | 35 mA with relays energized. |
| Relay Power Dissipation (Low Power) | 0.85 W with 24 V supply voltage and relays energized. |
| Relay Max. Power Consumption (Low Power) | at 30 V supply voltage and relays energized, 0.9 W |
| Relay Input Type (Low Power) | switch contact, logic level. |
| Relay Trip Voltage Levels (Low Power) | OFF status ≤ 1.0 V, ON status ≥ 6.0 V (maximum 30 V). |
| Relay Input Current Consumption (Low Power) | 3 mA @ 24 V(≈ 10 KΩ input impedance). |
| Relay Output Type (Low Power) | voltage free SPDT relay contact. |
| Relay Contact Material (Low Power) | AgNi90/10. |
| Relay Contact Rating (Low Power) | 60 Vdc, 2 A for Intrinsic Safety applications, 2 A 250 Vac 500 VA, 2 A 250 Vdc 80 W for non-Intrinsic Safety. |
| Relay Load Breaking Capacity (Low Power) | 15 * 10^6 / 1 * 10^5 operation, typical. |
| Relay Operate / Release Time (Low Power) | 5 / 2 ms typical. |
| Relay Bounce Time NO / NC (Low Power) | 1 / 5 ms. |
| Relay Response Time (Low Power) | 20 ms. |
| Relay Frequency Response (Low Power) | 10 Hz maximum. |
| Relay Safety Parameters (Low Power) | Uo/Voc = 0 V, Io/Isc = 0 mA, Po/Po = 0 mW. Ui/Vmax = 60 V, Ii/Imax = 2 A, Ci = 0 nF, Li = 0 nH. Um = 250 Vrms, -20 °C ≤ Ta ≤ 60 °C. |
| Relay Mounting | EN/IEC60715 TH 35 DIN-Rail. |
| Relay Weight | about 120 g |
| Relay Connection | by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm2. |
| Relay Location | Safe Area/Non Hazardous Locations or Zone 2, Group IIC T4, Class I, Division 2, Groups A, B, C, D Temperature Code T4 and Class I, Zone 2, Group IIC, IIB, IIA T4 installation. |
| Relay Protection Class | IP 20. |
| Relay Dimensions | Width 22.5 mm, Depth 99 mm, Height 114.5 mm. |
