D5011S Safe Isolator SIL3 Transmitter Power Supply

🟢 Active
Discover D5000 – Product Lifecycle Policy

Dimensions

Type	Description
Supply Voltage	24 Vdc nom (18 to 30 Vdc), reverse polarity protected
Current Consumption	45 mA @ 24 Vdc with 20 mA out, typical.
Power Dissipation	0.675 W @ 24 Vdc with 20 mA out, typical.
Input Type	4 to 20 mA (2 wires Tx current limited ≈ 25 mA), reading range 0 to 24 mA.
Transmitter Line Voltage	15.0 V typical, 14.5 V minimum, @ 20 mA.
Output Type	4 to 20 mA, on max. 550 Ω load in source mode (typical 12 V compliance).
Response Time	5 ms (0 to 100 % step change).
Performance (Ref. Conditions)	24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature.
Calibration Accuracy	≤ ± 0.1 % FSR.
Linearity Accuracy	≤ ± 0.05 % FSR.
Temperature Influence	≤ ± 0.01 % FSR on zero/span for a 1 °C change.
Isolation Test Voltage	I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/I.S. In 500 V; Out/Supply 500 V; Out/Out 500 V.
Operating Temperature	–40 to +70 °C
Storage Temperature	–45 to +80 °C
Safety Description	Associated apparatus and non-sparking electrical equipment.
Safety Parameters	Uo = 25.9 V, Io = 92 mA, Po = 594 mW at terminals 7-8, 9-10. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C.
Mounting Type	DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board.
Weight	about 125 g
Connection	by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions	Width 12.5 mm, Depth 123 mm, Height 120 mm.