D5263S SIL2 Load Cell Strain Gauge Bridge Repeater

Dimensions

Type	Description
Supply Voltage	24 Vdc nom (18 to 30 Vdc), reverse polarity protected.
Current Consumption	75 mA @ 24 Vdc with four 350 Ω load cells connected, typical.
Power Dissipation	1.8 W @ 24 Vdc with four 350 Ω load cells connected, typical.
Input Type	Up to four 350 Ω load cells in parallel or up to five 450 Ω or ten 1000 Ω in parallel.
Integration Time	12.5 ms.
Bridge Supply Voltage	4.0 Vdc nominal.
Bridge Output Signal	1 to 4 mV/V.
Output Type	Same as the input signal.
Output Impedance	500 Ω, typical.
Excitation Voltage	Externally applied between 4 V and 15 V.
Transfer Characteristic	Linear.
Response Time	≤ 20 ms (10 to 90 % step change).
Calibration Accuracy	≤ ± 0.003 % input FSR, after system calibration.
Linearity Accuracy	≤ ± 0.002 % input FSR.
Temp. Influence	≤ ± 0.002 % input FSR for a 1 °C change.
Isolation Test Voltage	I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; Out/Supply 500 V.
Operating Temperature	–40 to +70 °C.
Storage Temperature	–45 to +80 °C.
Safety Description	Associated apparatus and non-sparking electrical equipment.
Safety Parameters	Uo = 7.2 V, Io = 177 mA, Po = 471 mW at terminals 13-14-15-16-17-18. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70°C.
Mounting Type	DIN-Rail 35 mm, with or without Power Bus.
Weight	About 165 g.
Connection	By polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions	Width 22.5 mm, Depth 123 mm, Height 120 mm.

SIL Seviyesi	SIL 2