Dimensions
D5072D SIL2 Multifunction Temperature Converter
D5072D SIL2 Multifunction Temperature Converter
Connections
Description
| Type | Description |
|---|---|
| Supply Voltage | 24 Vdc nom (18 to 30 Vdc), reverse polarity protected |
| Current Consumption | 50 mA @ 24 Vdc with 20 mA out, typical. |
| Power Dissipation | 1.0 W @ 24 Vdc with 20 mA out, typical. |
| Input Type | Millivolt, thermocouple, 2-3-4 wire RTD or 3-wire transmitting potentiometer. See manual for details. |
| Integration Time | From 50 ms to 500 ms. |
| Input Range | ±500 mV (TC/mV), 0-4 kΩ (RTD/resistance), up to 10 kΩ (potentiometer). |
| Thermocouple CJC | Programmable: internal Pt1000, fixed, external or remote. |
| Output Type | 0/4 to 20 mA on max. 300 Ω load, source mode, limited @ 24 mA. |
| Transfer Characteristic | Linear, direct or reverse for all sensors. |
| Modbus Interface | Modbus RTU RS-485 up to 115.2 kbps for monitor/configuration/control. |
| Input Calibration & Linearity | See Instruction Manual for accuracy values. |
| Ref. Junction Compensation Accuracy | ≤ ±3 °C (internal), ≤ ±1.5°C (external), see manual for remote RTD. |
| Output Calibration Accuracy | ≤ ±10 µA |
| Output Linearity Error | ≤ ±10 µA |
| Output Temp. Influence | ≤ ±2 µA/°C |
| Isolation Test Voltage | I.S. In/Out 2.5 kV; In/Supply 2.5 kV; In/In 500 V; Out/Supply 500 V; Out/Out 500 V. |
| Operating Temperature | –40 to +70 °C |
| Storage Temperature | –45 to +80 °C |
| Safety Description | Associated apparatus and non-sparking electrical equipment. |
| Safety Parameters | Uo = 7.2 V, Io = 16 mA, Po = 27 mW, Ui = 12.8 V, Ci = 0 nF, Li = 0 nH, Um = 250 Vrms/Vdc, -40 °C ≤ Ta ≤ 70 °C |
| Mounting Type | DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board. |
| Weight | About 135 g |
| Connection | By polarized plug-in disconnect screw terminal blocks up to 2.5 mm² (13 AWG) |
| Dimensions | Width 12.5 mm, Depth 123 mm, Height 120 mm |
Additional information
| SIL Seviyesi | SIL 2 |
|---|
